Building a Home

Freestanding Or Lean To – Which Is The Best Greenhouse Option

Posted on

A greenhouse is a terrific idea for adults and children alike. They can grow their own vegetables as well as flowers and terrific plants that are not able to be grown in some climates. The choice of the type of greenhouse to buy is basically one of two. The freestanding greenhouse is one type and a lean to greenhouse can be chosen as well.

The freestanding greenhouse is usually placed in an areas where light is the best. This type is easier to move than the lean to type. This type is also available in a wide variety of configurations from square to rectangular to octagonal. They will generally need to be heated at night, especially if they are larger because of the surface area that is exposed.

The lean to greenhouse does not have as much space as a freestanding type. They are usually placed against a house or another building and for this reason the electricity and water needed are easily accessible. The lean to greenhouse can be purchased with an expansion kit that will allow it to be added to for the extra space is desired.

If cost is a consideration the lean to greenhouse may be more practical since the need to run another power source is not necessary. In addition, the lean to type will not need a separate water source and this will save money on materials. There may be the need for adding a heating system as well, which is another expense. Since a lean to greenhouse is against another building, they are provided shade during the especially hot days of summer. The freestanding greenhouse is exposed to the elements at all times because it is in the open.

The freestanding greenhouse will also need to be anchored in the event of heavy winds. This will usually require long stakes that are used to keep it in place when winds become gusty. If the area is generally windy most of the time, additional stakes may be a good idea to help anchor the greenhouse. The lean to greenhouse should only need stakes on the side that is not against the building. This will help to keep it attached, but the building or home that it is built against will provide the most protection from wind.

When choosing either type of greenhouse, it is important that they have good drainage. A free standing greenhouse should not be near trees because this will increase the risk of damage from a falling limb or branches. Since the lean to greenhouse is located near the home, you are more likely to see the plants every time you leave your home. This has an added advantage of allowing you to see anything that needs attended to right away. Rather than making a special trip to the greenhouse, you will pass it each time you walk outside.

The advantages and disadvantages of both will help you decide which type of greenhouse that you will choose. If the major consideration is expense, a lean to greenhouse is the better value.

How To Build A Ballista As A Home Project

Posted on

Built by Greeks, refined by Romans, war games of the period, weapon which initially used to throw rocks into enemy castles and strongholds, later resembled a giant crossbow, replaced by catapult, quick form of transportation easy take-off, landing issues

Not barista mispronunciation of oriental tendencies for the beverage brewer at your local java dive.

Root word for ballistic ballistics expert on spent bullets and guns knowledge, gone off rocker, no control once it leaves the source, hope for the best to reach target

A ballista is a weapon of ancient warfare, initially designed by the Greeks. It is
considered the technology of its period as it is able to hurl giant rocks to break castle walls and cause a significant dent in the enemys defenses. The Romans later refined the design into the beginnings of a giant crossbow of sorts. It also evolved into a catapult.

Before attempting any further, some research on how to build a ballista is recommended. It is technically not a difficult task to accomplish as the proof of the pudding is in the execution post-construction. In building a Greek ballista, identify sufficient footprint space for the ballista which includes its wooden base and the wooden arm once released. For added mobility, add some wheels to the base with brakes to keep in place during execution. Remember to give allowance for projectile testing. If you have a suitable backyard, do inform your neighbors beforehand to avoid unexpected calls from the local law enforcement. Otherwise a field is a better option.

Build a heavy base to avoid it topping over once the arm is released. Securely attach a basket or wooden box to one end of the arm to contain the projectile.

Add a pivot at one side of the base and securely attach to the end of the arm without the box. Add a winch to the base with a sufficient length of rope. Attach the other end of the rope to the end of the arm with the box. Turn the winch to tighten the rope and tautly pull back the arm. Secure the winch to avoid accidental release of the arm. Place a projectile in the box and release the winch for a pilot test. Stand clear of the front of the ballista to avoid getting hit by the arm slamming to the ground. Continue to fine-tune the ballista until pilot testing is accomplished.

Alternatively, you can build a ballista resembling the above with a slight variation to launching technique. Instead of the winch pulling taut the arm, build a wooden track in which to launch the projectile. Place the track at an angle to ensure maximum coverage of distance. Securely attach the winch at the lowest point of the track. Place a backing board at the highest point of the track and use the winch to pull the board back to the launching position to place the projectile. Once again, secure the winch to avoid accidental release.

Place the projectile at the launching position and release the winch. Continue to adjust the angle to achieve best results.

In building a Roman ballista, construct a heavy base and a wooden track as described above. Since it resembles a crossbow, either purchase a bow or build your own bow by bending a flexible yet strong wooden board. For easier flexing, either steam or soak the board and attach a bow string. Attach the bow to the highest point of the track, facing out as per normal practice but in a horizontal fashion. Pull back the bow string as much as possible to the lowest end of the track, place a projectile and release. Continue to adjust the angle to achieve optimal results.

Once you have managed to build any of the above ballistae, invite a few friends over for a demonstration and a competitive game of hitting targets.

Steel Kit Homes The Best Choice

Posted on

Many people dream about building their own home, but are intimidated by the cost. Constructing a traditional home requires considerable time and expertise-whether one does it themselves or hires someone else to do it. Steel kit homes have emerged as an option to the traditional home. Steel kit homes are cost-effective and much easier to construct than a wooden house. Steel kit homes are shipped in one or two loads and assembled on site. These houses are strong, sturdy, fire retardant and 100% termite resistant. Steel is becoming popular in many applications thanks to its durability and the fact that it is recyclable.

A kit home can be modified to suit ones budget and personal needs, and modified to the particulars of a site, neighborhood or environment as well. A kit home is a particularly excellent option for Australians because it allows them to own a home created in their personal style.

Naturally, those interested in building a steel kit home will also have to purchase the land on which the home will be built. Not to worry; the price tag is still much lower than that of a conventional house. Financing is available for all kit home designs, thereby helping one to build their dream home.

A number of kit home designers are available in Australias Queensland, NSW and Victoria. All Australian kit home companies will provide you with the complete kit home package. This includes all kit home building materials, all appliances and fixtures for kitchen, laundry and bathroom, all fittings, insulation, tiles, paint, electrical and plumbing kits, even a set of tools to help the owner build their own home. Kits can cost up to 40% less than conventional home construction because:

* Frames and materials are mass produced

* All components are cut to size and pre-marked at the factory

* Delivery of all the components comes in one or two loads

* Fast, relatively simple construction-many pieces just slot together

* No architect service costs

* No special tools or heavy equipment required

If youre thinking of building a new home, steel kit homes are a good decision for quality and price.

Tips For Building A Bookcase

Posted on

Furniture making can be something that you work on for your entire life. Many people choose to start with something simple, like a bookcase for their home. However, it may not be as simple as it looks. Creating something that is perfectly square can be a challenge for some beginner woodworkers. Creating things that are sturdy enough to withstand years of use and that also look good enough for you to put into your home may take some instruction. Use these tips for learning how to make sure your bookcase is sturdy, square, and attractive.

1) First, measure the space and decide on dimensions for your bookcase. Determine how many shelves you would like to have in your bookcase and go shopping for your wood. Hardwoods will generally be more durable, but many soft woods are perfectly suited as well. Choose the one that you like best and buy pieces that give you enough to fit your dimensions and plan. Lay all of the pieces flat together to make sure that they are not warped before you purchase them.

2) Cut the plywood using a miter saw or a table saw to the dimensions that you have set. You will need to cut the side panels and the top and bottom pieces, making sure that they all measure exactly right. Then, cut your shelves and make sure that everything will fit together perfectly.

3) Mark your side panels for router joint grooves. Lay the two side panels side by side, line up the top and bottom perfectly, and then nail them together using a small scrap piece of wood. Use finishing nails or screws to affix the scrap wood to the bottom and top of the side panels. Place a T-square on the side so that it crosses the center line of the two panels butted against each other. Draw two lines, 3/4 apart to mark a path for your router. Most shelves are around 16 apart, but you can make your shelves however far apart that you want.

4) Assemble the pieces together making sure that the router grooves are facing inward. Nail the top and bottom pieces to the side panels. Youre essentially creating a box, so lay it down flat and check for exact 90 degree angles before you attach. You can use slender nails, a nail gun, or drill pilot holes to insert screws. Dont skip drilling pilot holes for screws or youll risk splitting the wood.

5) Now that you have a perfectly square box, put a small amount of wood glue into each of your router slots. Slide your shelves into place and then nail them from the outside of the bookcase to secure them.

6) Cut a 2 wide board to fit inside of the rear top of your bookcase. This will be the cleat that holds the back panel in place if you choose to add one and it also secures your bookcase to studs in the wall. Glue and nail the cleat into the top rear portion of the case, flush with the top and side panels. Nail it from the sides and the top to make sure that it offers the proper support for the finished product.

7) Cover up the raw edges of the bookcase by attaching small 1-2 inch wide boards to the facing. A fluted moulding or a split wood dowel rod works great for giving the front edge of each shelf a clean finish. Use a hardwood dowel for durability. Fill in nail holes, sand and youre ready for finishing.

Knowing The Responsibilities Of Home Builders Slidell

Posted on

The challenge of building a home can bring a different experience for every homeowner. It is a long process and involves many different people in the construction industry from the contractors to the suppliers of building materials. While the idea of building a new home can be very exciting for every homeowner, it can also cause tremendous pressure and anxiety. The process entails many details that need to be taken care of personally by the homeowner. Homeowners need to coordinate closely with the preparation of the floor plans, choosing the colors, types of interior finishing materials, and a lot more. There are issues on building permits with the local government that have to be complied with.

In all likelihood, you will have to choose one of the home builders Slidell-registered and licensed to oversee and handle the construction of your new home. With the floor plans executed by a professional architect, you can request the home builder for an estimate of the entire project, including cost of labor and materials. You may choose to take as many estimates as possible as these will be compared with each other for cost, completion date, scope of work, etc. And while collecting the estimates, you should also start checking the background of each home builder in terms of reputation, credibility, financial stability, projects completed, years of experience and specialization.

From the number of home builders Slidell-licensed, you should pick the one that represents the best offer. Once you have chosen the home builder, you should have a meeting or discussion on the different aspects of construction like procurement, permits/license, construction schedule and terms of payment, etc. It is important that all of these aspects are clearly defined in order to avoid any conflict in the future. The home builder should then explain on the various stages of construction such as securing the necessary building permits required prior to starting the construction, stages of procurement of materials, stages of construction pertinent to electrical, plumbing, interior finishing, etc. You need to understand the progression of work in order to know what to expect during actual construction.

Your home builder should ensure that the construction site has all the necessary safety precautions and measures are in place and enforced at all times during the construction. For additional protection, you should check the home builders insurance coverage for the project and the workers involved in the construction. The home builder should have a builder’s risk insurance. This is the type of insurance that protects your home and the builder while construction is ongoing. Additionally, the builder should have liability insurance to cover for construction flaws discovered within a period of ten years. The safety of the construction workers should also be covered by the builders workmens compensation insurance. Any accident that happens on the construction site involving the construction workers should be covered by such insurance.

The home builder should also initiate periodic inspections during the different stages of construction to make sure that everything is done according to the plans. The home builder should ask the homeowner to join the inspection. Alternatively, the homeowner may conduct his separate inspection in order to make sure that the home builder complies with all the terms of construction contract. There are some home builders who might conceal defects during inspection. Conducting unannounced inspection will expose the entire construction state to the homeowner. If in doubt, you may ask the architect to help you with the inspection to make sure that the plans are strictly followed.

Building a Home Theater – The Three Basic Components

Posted on

Are you planning to build a home theater? If you are not sure of what you need to build a basic home theater setup read ahead to find out.

Setting a complete movie theater in your home is something that is unachievable to anyone but the rich. However setting your own high definition home theater is accessible if you have a normal budget. All you really need to know is a little about the basic components of home theaters and be smart when it comes to shopping wisely.

A regular home theater is built around three basic components. The first one of these components is the television set. You may or may not already own an HDTV television but a regular 27 inch 720p LCD high definition television set is not that expensive considering how prices on HDTV screens used to be. A set of this size will or even a little bigger will surely not cost much. For 1080p televisions the story is different. These are more expensive but you will be able to obtain easily a 32 inch 1080p set for under a thousand dollars. It all boils down to preference and budget.

The second very important element to any home theater is a BLU-RAY player. Regular DVDs are not able to store the huge amounts of data that movies in HDTV need and some may not even support progressive scan. It is all a matter of storage space. A regular BLU-RAY player is not that expensive. But, if you would like a high end model with tons of features then expect a higher price.

The third important component and one that is very essential for any home theater is speakers. To have a good surround sound effect and get the best possible experience you need a minimum of four directional speakers and a subwoofer. Regular speakers are to be positioned at the sides of the television set, left and right respectively. The other two speakers should be placed where the viewers will be sitting. If possible, these speakers should be pointing to the back of the couch or any furniture that sits in the middle of the room. Since bass frequencies are not directional, the subwoofer can be placed anywhere on the room but not to close to the viewer so that it overshadows the sound from the directional speakers. An additional channel may be used as a center channel. This speaker if used ,should be pointing straight to the viewer and is responsible for better sound projection of dialogs and frontal sounds.

The basic setup for a home theater is not that expensive. However for bigger rooms a bigger budget may be necessary especially when it comes to speakers. In the end, if we take in to consideration the hours of fun that your family will enjoy not to mention the time spent together, a small home theater will surely be worth the investment.

How To Find Cheap And Affordable Building Supplies

Posted on

Building construction is an expensive form of investment. Whether you are going to build a house or a commercial space for your business, you have to spend a handsome amount for that. With regards to this, many people are thinking of ways on how to save money from building supplies. Will there be any possible way to save money while you are doing your construction?

Of course, there is! You can save money if you learn the ways to find cheap and affordable building supplies!

Buying cheap and affordable materials for your construction should be one among the top priorities of a person who is planning to have a construction. Being extra careful in finding cheap building supplies is one way to save money. When you are careful, you will surely get the right materials and this will not make you feel sorry for what you have done. When we talk about cheap building materials, reading this article can be a helpful tool for you. Here, you will learn the best information about this particular subject.

*Knowing the kind of building you are going to make is the first ting you need to do. If you know the type of building, then you will also know the right kind of materials to buy. This will reduce the chance of committing mistakes in the process of buying building supplies.

*Spend time to walk in your area and look for other constructions. This will help you pinpoint the type of construction you will have.

*You also need to talk with the construction workers and make a discussion about the kind of materials and building supplies to be used for the construction. Talking to these people will allow you to have a clear picture or estimate about the bud get for your construction. Feel free to tell them the kind of construction you want so they can help you assess it.

*Information about building supplies can be obtained from the center of building and construction supplies. Prices are presented in each center, so you will have the option to compare prices from one center to another. This will lead you to purchase the more affordable ones.

*The moment you have gathered enough information, you may now go home, finalize your decision, and start the kind of construction you want. Just make sure that you do the preparation in a correct way.

Building a New Home Knockdown and Rebuild!

Posted on

Did you know that knockdown and rebuild has become a popular option than buying a new house and lot or renovation?

It has become a popular approach for families who want to build a new home without leaving their old home and favorite suburb. Just imagine building a house of your dreams right exactly where you are. And the cost of building a new home using the knockdown and rebuild option is half less than the cost in renovating and is 75% cheaper than buying a new house and land in a new location.

So if you are ready to knockdown and rebuild for a stylish and elegant home which will surely stand-out in your neighborhood, contact the most preferred home builders in Melbourne, Urbanedge Homes.

The Urbanedge Advantage

At Urbanedge Homes the process of planning and building your dream home is simple and straightforward. Professional and experienced Melbourne home builders provide advice to help you choose the home designs and house plans that will suit your neighborhood block. They will also take care of building and local government approvals and provide a fixed price building contract to assure budget precision and peace of mind.

That means Urbanedge home designs and inclusions are flexible which you can tailor to suit your lifestyle and budget. Their professional in-house interior design consultants will help you finalize your home external and internal choices.

Urbanedge Homes’ knockdown and rebuild homes are also energy efficient thanks to the latest building innovations and technology, their home builders use. New homes are also well-designed and suited to fulfill the needs and desires of today’s modern lifestyle.

The Urbanedge Experience

Urbanedge Homes has completed knockdown rebuild projects in various Melbourne regions, including Bayside, as well as popular Melbourne municipalities such as Maribyrnong, Moonee Valley, Moreland and Nillumbik to name a few. So if you love the area that you live in, knockdown and rebuild may just be the option for you.

Building A Backdrop For Your Videos

Posted on

There are dozens of reasons why you might want to build your own movie set. Maybe you have created a YouTube channel and need to create a backdrop in order to please your thousands of subscribers. Or maybe you are working on a school project and the added effort and professionalism could bump your grade up to an A. Whatever the case, do not fear! Building a set is easier than organic chemistry. Okay fine, it is a lot easier than organic chemistry.

First you will need to decide what kind of movie set you will want and or need. A simple backdrop for a video requires limited supplies and little effort, but an interactive set requires quite a bit more work. First The Easy!

A back drop for a video should be a simple affair and dark, solid colors are your best bet. That way you can have notifications and links pop up around you which adds to the video. If you are in a small room and have very limited resources a queen size or larger sheet can work fine. But keep in mind that these will move with the air, and can show wrinkles which will take away from any professionalism you are trying to exude. To make a basic backdrop, you will need to get one by four pieces of wood, white pine works best, glue, staples and a staple gun (or screws and a drill) particle board, and canvas.

A lumber yard should be able to cut down your pieces of wood for you to length. Join the pieces together to make a square and take the particle board that has been cut into squares or, better yet, triangles. Glue or screw the particle board to the one by fours to keep them square, and cut at least two one by fours at forty five degree angles. Wedge them in the corners to brace the frame and make it sturdy. Now stretch the canvas over one edge of the frame and staple the corners. Pull the canvas over the rest of the frame, making sure to get all of the wrinkles out, and staple it along the edges. There should be about an inch of give in the middle of the canvas. Now take a brush and your glue, and generously lather all of the canvas. Let it dry overnight and it will tighten and harden, making the backdrop firm and sturdy.

Before you build, make sure that you have a place to store your back drop since they are virtually impossible to fold and or bend. If you want a big backdrop, but do not have the room to store it, make smaller ones that you can put together. Try making them different colors so you can switch it up in your home movie.

Brad Pitt may not be starring in your movies, but putting in that extra effort to make them seem more professional can go a long way.

Four Common and Preventable Home Building Mistakes

Posted on

Many people who have finally achieved their dream of building a new home find that there can be considerable setbacks that come with home building. Since most people don’t have experience with construction – especially first-time homeowners – it is understandable that the same mistakes are often made when it comes to choosing a builder, designing the home, and keeping the whole process affordable. Here are a few frequently made but easily avoidable home building mistakes.

To start with, unless you are an expert meaning that you actually have experience building homes don’t try to handle any part of the process on your own. Many people think that they can save money by taking on the role of general contractor or doing other work. This can be a great way to save money initially, but it will cost more ultimately if you hire bad contractors, let things be built incorrectly, or experience delays because you can’t coordinate the people you’ve hired.

Next, when you hire a builder, make sure that you’ve done your research. You shouldn’t just find someone online or in the phonebook and hope for the best. There are plenty of places to cut corners when building a home and plenty of scammers waiting to capitalize on that fact. You should read client reviews, look at past work, and check for accreditations like membership in trade associations.

Unless you’re looking for an extremely customized home and have great faith in your builder, consider buying professional house plans. This can save you a lot of grief later on, as these designs are tried and tested. They are also sure to be marketable; a truly eccentric custom floor design might prove hard to sell to others if you do end up moving to another home someday.

Finally, really think about your home’s design – everything from the broad layout to the location of doorways and light switches before giving the go ahead for building. Consider how you’ll use the space on a daily basis and what changes you might make in coming years. Making even minor changes in the design of your home once construction has begun can lead to delays and complications, and going back years later to make those changes can bes expensive. If you’re in doubt about a certain feature, consult with an architect or builder, or give yourself a little more time to think “you’ll be glad later that you did”.

These tips should help take some of the stress out of home building. Having a new home built should be an exciting and enjoyable event, so do your best to lay a good foundation beforehand and enjoy the construction stage instead of feeling frustrated or regretful.